Content
1.
How to understand the instruction manual ...................................... 3
1.1.Markings on the device ................................................................ 3
1.2.Markings in this manual ............................................................... 4
2.
Important safety notes ...................................................................... 4
3.
Unpack and check the device ............................................................ 8
4.
Operation of the device..................................................................... 9
4.1.Overview about the parts ............................................................ 9
4.2. Overview about the display ........................................................ 9
4.3.Quick start guide ........................................................................10
5.
Demount and mount protection cap ..............................................11
6.
Mount and demount reflector ........................................................12
7.
Screw in and out of modeling lamp.................................................13
8.
Connect to power supply ................................................................14
9.
Switch the device on and off ...........................................................14
10.
Adjustments ....................................................................................16
10.1.Adjust flash output ...................................................................16
10.2.Adjust the modeling lamp depending on flash output ............17
10.3.Adjust the modeling lamp independent from flash output .....17
10.4.Switch the audio button on and off .........................................18
10.5.Prepare and adjust flash trigger ...............................................19
Prepare flash trigger through camera ......................................19
Prepare flash trigger through remote receiver (optional) .......19
Switch on and off of flash trigger through built-in photo cell ..19
Switch on, adjust and switch off of pre-flash suppression ......20
11.
Mount on tripod (optional) .............................................................20
12.
Mount reflex umbrella (optional) ....................................................21
13.
Switch on and off of modeling lamp ...............................................22
14.
Trigger the flash ...............................................................................23
15.
Transportation and storage .............................................................24
16.
Solve problems ................................................................................25
17.
Maintenance ...................................................................................26
17.1.Continuous inspections ............................................................26
17.2.Cleaning ....................................................................................26
17.3.Change flash tube ....................................................................27
17.4.Change micro-fuse ...................................................................29
17.5.Charge flash capacitor ..............................................................30
18.
Accessories and options ..................................................................30
19.
Spare parts ......................................................................................31
20.
Disposal and environment protection .............................................31
21.
Technical specifications .................................................................. 32
22.
Overview about operation panel.................................................... 33
