4.
Operation of ft heevice
4.1.
Overview about the parts
A
Reflector
B
Unlocking Lever
C
Photo Cell (hidden)
The Photo Cell is below the red,
transparent cover on the top side of the
device
D
Ventilation Slots
E
Tripod Mount
F
Umbrella Holder
G
Handle
4.2.
Overview about the display
1
Audio ON/OFF
2
Photo Cell/Slave ON/OFF
3
Preflash Function/Slave
4
Photo Cell ON/OFF
5
Output Flash (bottom) and Modeling
Lamp (top)
6
Voltage Control 110V/220V – blinks
during charging
7
Operational Readiness
8
Warning
9
10
Flash is activated
Modeling Lamp is activated
4.3.
Quick start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device
for the first time to avoid damages on the device.
WARNING
Please note the safety notes in the respective chapters throughout
operation.
1.
Demount protection cap.
2.
Mount reflector.
3.
Insert modeling lamp.
4.
Mount reflex umbrella (optional).
5.
Connect to power supply.
6.
Switch on device.
7.
Adjust modeling lamp.
8.
Adjust flash output.
9.
Adjust audio button.
10.
Prepare flash trigger.
11.
Mount on tripod (optional).
A B
C
F
E
D
G
10
10
9
1
2
3
4
5
6
7
8
9
10
