10.5.
Prepare and adjust flash trigger
Prepare flash trigger through camera
ADVICE:
Please note the user information of the camera manufacturer for flash
synchronisation.
1.
Connect sync cord (included in delivery) with the connecting socket on
the device.
2.
The other end of the sync cord should be connected with the PC jack
socket of the camera.
Prepare flash trigger through remote receiver (optional)
ADVICE:
Please note the user information of the remote receiver manufacturer.
1.
Connect the cable of the remote receiver with the socket for the sync
cord.
Switch on and off of flash trigger through built-in photo cell
The photo cell enables the device to trigger through
−
another external device
−
IR remote trigger
−
On-camera flash devices
−
On-camera flash devices with integrated pre-flashes.
1.
Switch on device.
See
Switch the device on and off
.
2.
Switch on photo cell:
Press push-button SLAVE.
The signal SLAVE 1 is shown in the display.
3.
Switch off photo cell:
Press push-button SLAVE until the signals SLAVE 1, SLAVE 2 and SLAVE 3
go out.
Switch on, adjust and switch off pre-flash suppression
1.
Switch on device.
See
Switch the device on and off
.
2.
Switch on photo cell:
Press push-button SLAVE.
The signal SLAVE 1 lights up.
3.
Switch on pre-flash suppression:
•
Camera with 1 pre-flash:
Press push-button SLAVE until the signal SLAVE 2 lights up.
•
Camera with 2 pre-flashes:
Press push-button SLAVE until signal SLAVE 3 lights up.
4.
Switch off pre-flash suppression:
Press push-button SLAVE until the signals SLAVE 2 and SLAVE 3 go out.
11.
Mount on tripod (optional)
ADVICE:
Please note the user information of the manufacturer.
CAUTION
Select a tripod of suitable weight and dimensions. See
Technical
Specifications
.
Make sure, that the tripod with the mounted device has a tilt and skid
resistant stand.
20
19
