1
4
You can use the Keep Warm feature without any other
cooking operations or you can set it to activate after a timed
or delay timed cooking operation.
You should not use this feature to reheat cold food.
2
0
) Using Sabbath
You can use the Sabbath feature with baking only. The oven
temperature may be set higher or lower after setting the
Sabbath feature. (The oven temperature adjustment
feature should be used only during Jewish holidays.) The
display, however, will not change and tones will not sound
when a change occurs. Once the oven is properly set for
baking with the Sabbath feature active, the oven will remain
continuously on until the Sabbath feature is cancelled.
If the oven light is needed during the Sabbath, touch light
before activating the Sabbath feature. Once the oven light is
turned on and the Sabbath feature is active, the oven light
will remain on until the Sabbath feature is turned off. If the
oven light needs to be off, be sure to turn the oven light off
before activating the Sabbath feature.
How to use the Sabbath feature
1 Touch Bake. The default temperature is 350 °F.
2 Enter the temperature you want, eg. 375 °F, by using the
number pad.
3 Touch START. The temperature display will start to
change once the oven temperature reaches 100 °F.
4 Touch Bake and Broil for three seconds at same time. The
panel will display Set SAb.
5 Touch START. Activate the oven Sabbath function, the
panel will display SAb, the oven heating work automatically
becomes 74 hours. Once SAb appears in the display, the
oven will not beep or display any further changes. You may
change the oven temperature once baking has started.
Remember that the oven will not beep or display any
further changes once the Sabbath feature is engaged.
6 You can turn the oven off at any time by touching Cancel.
This will turn only the oven off. If you want to deactivate the
Sabbath feature, hold down Cancel for 3 seconds. Sab will
disappear from the display.
•
Do not to attempt to activate any other program
feature except BAKE while the Sabbath feature is
active. ONLY the following key pads will function
correctly with the Sabbath feature on: NUMBER, BAKE,
START and Cancel. All other keypads should not be
used once the Sabbath feature is activated.
You can change the oven temperature, but the display
will not change and tones will not sound when a
change occurs. (The oven temperature adjustment
feature should be used only on Jewish holidays.) After
changing the temperature while the unit is in Sabbath
mode, there is a 15 second delay before the unit
recognizes the change.
Should you experience a power failure or interruption,
the oven will shut off. When power is returned, the
oven will not turn back on automatically. SAb will be
displayed in the oven control display, but the oven will
not operate. Food may be safely removed from the
oven while it is still in the Sabbath mode, however the
oven cannot be turned back on until after the
Sabbath/ Holidays. After the Sabbath observance, turn
off the Sabbath mode. Touch and hold down Cancel
for 3 seconds simultaneously to turn the Sabbath
mode off. The oven may then be used with all normal
functions.
Do not open the oven door or change the oven
temperature for about 30 minutes after you have started
Sabbath mode to allow the oven to reach the set
temperature.
21) Temp Unit (Fahrenheit or Celsius temperature
selection)
You can program the oven control to display the
temperature in Fahrenheit or Celsius. The oven has been
preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1
Touch SETTING in standby continuously until SET°F/
℃
display in panel,touch START to save.
2
Touch SETTING to change between (Fahrenheit)
and(Celsius).
3
Touch START to save the changes
.
2
2
) Time of Day (12hr/24hr)
The oven control can be programmed to display time of day
in the 12 hour or 24 hour mode.
The oven has been preset at the factory to display in the 12
hour mode.
How to change between the 12 and 24 hour time of day
display
1
Touch SETTING in standby continuously until SET 24 H
display in panel,touch START to save.
2 Touch SETTING to change between (12Hr) and(24Hr).
