22
FD-8
Connect the 50-pin flat cable between J12 of MAIN PCB assy and the HDD connectors. In order to connect pins
straight, twist the cable as shown below. (Pin-1 of J12 (RED) must go to Pin-1 (RED) of HDD connectors.)
Connect the following cables from the connectors on the MAIN PCB assy.
• 7-pin cable to the J10 (from MIXER A PCB assy)
• 9-pin cable to the J11 (from MIXER A PCB assy)
• 9-pin cable to the J3 (from MIXER B PCB assy)
• 9-pin cable to the J7 (from DISPLAY PCB assy)
Tighten 17 x screws (BBT 3 x 8 BZn) fixing the FD-8 Top Panel section to the Bottom Panel section.
8)
9)
10)