12
FD-8
4. SERVICE MODE
There are various optional modes available in the FD-8 Service Mode. Please utilize them when servicing the unit.
Connect a SCSI device, insert the diskette formatted by the FD-8 and turn the power of SCSI device on.
After confirming that the access LED on the SCSI device is lit and then goes out, turn on the power of FD-8.
While holding down the
STOP
button and
SHIFT
key, press the
SETUP
key.
The way of putting the FD-8 into Service Mode is as follow.
4-1. Putting FD-8 into Service Mode
1)
2)
3)
As shown below, by rotating the jog dial C.W. or C.C.W., various optional modes will be displayed in addition to the
general SETUP menus. In order to select a certain optional mode, press the EXECUTE/YES key while its menu is
displayed.
