14
FD-8
4-4. Display/Button Test
This mode tests if all the segments on the LCD display, LEDs
and buttons (switches) on the FD-8 top panel are correctly
working or not.
To execute this test, press the EXECUTE/YES key while
“?” is blinking.
If the FD-8 is in a normal condition, all the segments on the
LCD display will be lit solid and all the LEDs on the top
panel will start blinking.
If the FD-8 is not in a normal condition, faulty segments on
the LCD display and/or LEDs on the top panel will remain
unlit.
In this condition, if the EXECUTE/YES key is pressed one
more time, the Button Test can be executed.
The Button Test checks if each key/button and jog dial are
working properly or not. The display on the left indicates
that the RECORD button is pressed and held down. (“K”
stands for the Key and “J” the Jog dial.)
The display on the left indicates the condition when the jog
dial is turned C.W.
The table below shows the relationship between the key/
button/jog dial and the corresponding numbers appear on
the LCD display.
In order to quit the Button Test, turn the jog dial C.W. or
C.C.W. further after “J_20” or “J-19” is displayed
respectively.
Key/Button/Jog Dial
No.
RECORD
K01
STOP
K02
PLAY
K03
REWIND/
K04
F FWD/
K05
SHIFT
K06
VARI PITCH/ P.EDIT
K07
AUTO RTN/PLAY
K08
LOCATE/ LOC MEM
K09
HOLD/
K10
STORE
K11
EDIT
K12
Key/Button/Jog Dial
No.
UNDO/REDO
K13
EXECUTE/YES
K14
EXIT/NO/ EJECT
K15
AUTO RTN START
K16
AUTO PUNCH IN
K17
AUTO PUNCH OUT
K18
AUTO RTN END
K19
CLIPBOARD IN
K20
CLIPBOARD OUT
K21
DISP SEL
K22
SETUP
K23
TIME BASE SEL
K24
Key/Button/Jog Dial
No.
RECORD TRACK 1/L
K25
RECORD TRACK 2/R
K26
RECORD TRACK 3/L
K27
RECORD TRACK 4/R
K28
RECORD TRACK 5/L
K29
RECORD TRACK 6/R
K30
RECORD TRACK 7/L
K31
RECORD TRACK 8/R
K32
SCRUB
K34
JOG DIAL (C.W.)
J 00 ~ 20
JOG DIAL (C.C.W.)
J -00 ~ -19
: blinking
?
