24
Turn the hob off
The hob is switched off by pressing
.
The sound signal beeps and all indicators go off, except for those hotplates which are
still hot and display the warning
sign as an indication of the remaining heat.
If you switch the hob off prior end of cooking session, use the remaining heat and save
electric energy.
Key-Lock
By activating the key lock protection you can stop the operation of the appliance and the
use of hotplates.
Activation
The cooktop must be turned on.
Press
for approximately 1 second, the corresponding LED turns on above the key,
the block is active.
Safety lock prevents the activation of al sensors, except for
and
.
If the hob is switched off when the lock function is activated, it remains in memory until a
new switch on of the hob.
When set timers end their time, alarms can be switched off pressing
or
without
need for unlocking the control.
Deactivation
The cooktop must be turned on
Press
for 1 second; after that, the unlocking is confirmed by a beep.
Child-Lock
This function can only be activated/deactivated after turning on the hob with
Activation
• Press
and
simultaneously, then press
again.
• The function is active and all displays show
• Hob control remains locked and switches automatically off after 10 sec.
The Child-Lock deactivates all keys except
. Once activated electronic stays
locked even if the control is switched off and on again.
Deactivation
• Within 10 sec. press
and
simultaneously, then press
again.
The function is not active.
One- time unlocking (for one cooking event)
• Press
and
simultaneously.
• The Child-Lock is off for cooking session.
• After switching off the hob, Child-Lock is reactive and hence active when switched on the
hob again.
Pause
The execution of the function is only possible if at least one zone is on.
The pause condition may also be activated with cooking zone specific errors, here,
the error display is hidden. Also residual heat indication, special messages such as
,
or
are hidden; the pause display has priority. If there is a general error
during the pause, the control switches off and terminates the mode
.
Activation
Press
for at least 1 second, the corresponding LED turns on above the key and all
displays show
.
While the Pause function is active
Any Timer (also Alarm Timer) set before the pause will be stopped during the pause and
continue when pause mode is quitted.
A selected booster or heat up time automatic function is terminated.
Residual heat calculation and maximum operation time limitations will not be interrupted
and keep on working in the background.
Functional LED’s such as Timer, multi-zone, keep on glowing according to their status.
The pause mode can only be active for maximum 10 min.
Throughout the pause time
can be used to switch the control off. In this case
the pause mode is also deactivated.
