Operation Maintenance Manual
11-2015
PN 691250-Z-BC-D - Revision: 04
Solid Body Elevator
9
G
EN
ER
A
L
VII
Safety Symbols
The safety precautions in this OMM contain standardized
depictions and symbols. Four hazard classes are
distinguished depending on the probability of occurrence
and severity of the consequences. Selection of the
WARNING category depends on the probability of
occurrence and the possible extent of damage.
CAUTION
Indication of recognizable hazard for
humans or possible property damage.
Failure to observe can lead to
reversible injuries or property
damage!
The symbol as specified in ANSI Z535.6
emphasizes the cause.
Measures for avoiding are listed.
WARNING
Indication of recognizable hazard for
humans.
Failure to observe can lead to
irreversible injuries!
The symbol as specified in ANSI Z535.6
emphasizes the cause.
Measures for avoiding are listed.
DANGER
Indication of imminent hazard for
humans.
Failure to observe can lead to
irreversible or lethal injuries!
The symbol as specified in ANSI Z535.6
emphasizes the cause.
Measures for avoiding are listed.
Preliminary Safety Precautions
Safety precautions are given in the preceding form at the
beginning of complete sections or sections. They apply for
the entire section or the entire subsequent section.
Safety Precautions Relevant for Action
If a safety precaution applies only for one single action
or a short series of actions, it is integrated into the text
preceding the possible hazard point.
For example:
1. Attach hoisting gear to eye bolts in cover.
CAUTION
of pinching/crushing hands! The cover can
fall shut when the retainer is not engaged. Never open the
cover by hand.
2. Open the cover with a crane and suitable hoisting
gear.
3. Unscrew the M10 bolts with a 17 mm box wrench.
4. ...
Instructions for Safe Procedure
Special work steps to ensure Safe Procedure are depicted
as follows (example):
Safe Procedure
1. Shut off Equipment.
2. Disconnect supply lines.
3. Attach Equipment to crane.
4. ...
