Operation Maintenance Manual
Solid Body Elevator
PN 691250-Z-BC-D - Revision: 04 07-2018
14
TR
A
N
SP
O
RT/
IN
STA
LL
AT
IO
N
3
Transport / Setup
Ensure that setup and installation work
are accomplished only by sufficiently
qualified and trained personnel.
Read these instructions carefully before
setting up the Solid Body Elevator and
putting it into service.
3.1
Delivery
The Solid Body Elevator and all accessory parts are shipped
in a transport crate. Instructions for safe transport are
attached to the transport crate. Transport the packed
equipment as specified in these instructions.
3.1.1
Scope of Delivery
The scope of delivery includes all components required for
the intended operation of the Solid Body Elevator.
INFO
The contract documents and shipment papers
specify the precise scope of delivery. Check
these documents carefully at the time of
delivery. In the event of any discrepancies
please contact the FORUM Handling Tools
representative („X Contact worldwide“ on page
11).
3.1.2
Unpacking and Disposal of Packing Material
Remove the transport packaging and transport aids
before hoisting the Solid Body Elevator to final site.
NOTE
Do not remove transport retainers! The
transport retainers should be removed only at the
installation site just before startup.
Check scope of delivery
1. Are any transport damages visible?
2. Is the shipment complete? Compare the scope
of delivery with the specifications in the shipping
documents.
If the Solid Body Elevator has been damaged during
transport or the shipment is incomplete, please notify
the manufacturer immediately („X Contact worldwide“
on page 11
). Dispose of the packaging material
ecologically in compliance with all applicable regulations.
3.1.3
Intermediate Storage
If intermediate storage of the Solid Body Elevator is
necessary, observe the following:
• Leave the Solid Body Elevator in the transport
packaging. This provides sufficient protection against
external influences.
• Secure the Solid Body Elevator to prevent it from
Slipping or falling due to motion.
Fig. 12: Fixed Solid Body Elevator
