manualshive.com logo in svg

Forum 691250-Z-BC, Operating Instructions Manual

Share
Download
Forum 691250-Z-BC Operating Instructions Manual Download Page 32

Operation Maintenance Manual

 

Solid Body Elevator  

 PN 691250-Z-BC-D - Revision: 04 07-2018

18

TR

A

N

SP

O

RT/

 

IN

STA

LL

AT

IO

N

3.5 

Installation Checklist

The Solid Body Elevator has to be installed as shown in the OMM.

Recommended Checks 

OK

There are no foreign objects in the working area of the Solid Body Elevator.

OK

Lifting equipment has been removed.

OK

All assemblies, parts, areas and surfaces which have to be lubricated, are lubricated.

OK

The right size Bushing is in use.

OK

There are no loose bolts, nuts, screws and washers.

OK

All warning signs are present and readable.

OK

No visual damages recognizable.

OK

The Solid Body Elevator is mounted properly to Elevator-Links.

OK

All transport tools have been removed.

Info

The Installation Checklist shown above contains 
only essential points and should help to avoid 
subroutines and to show main contents of an 
Installation process. Check at least the above 
mentioned points on your Solid Body Elevator. 
For further questions or complete Installation 
Checklists (templates), please contact the 
Technical Support from FORUM Handling Tools.

 

Summary of Contents for 691250-Z-BC



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands