28
PURE VIEW: Al
13
HOME FULL GLASS PANEL INSTALLATION
41-7/16” [1052.5mm]
1” [25.5mm]
2-5/8” [66mm]
4-3/16” [106.5mm]
1” [25.5mm]
35-3/8” [899mm]
ANGLE BRACKET: BRACKET INSTALLATION
Step 1:
Mark Bracket Hole Locations
1. Mark the centerline of each post with a pencil.
2. Take measurements used in Fig. 1 and 2 to mark bottom
and top bracket hole locations onto posts.
Note:
•
Installed panel heights include space between the deck
surface and underside of bottom rail. AL
13
HOME 32-1/2”
[825.5mm] panels have a 3-1/2” [89mm] space. AL
13
HOME
40” [1,016mm] panels have a 2” [51mm] space.
A
C
A
B
Fig. 2
Step 2:
Pre-Drill Aluminum Angle Brackets
Tip:
• It’s important to double check dimensions to confirm
accuracy of bracket hole locations before drilling.
Fig. 1
Bracket Hole Locations
Pre-drill Dimensions: Pre-drilling with a 3/16”[4.5mm] drill bit is required
A*
B
C
*Dimension A positions bottom edge of rail (1)
3-1/2” [89mm] and (2)
2” [51mm]
above deck surface.
*Dimension A is measured from the bottom surface of post base.
32-1/2” [825.5mm] Panel
40” [1016mm] Panel
(1)
(2)
