19
INSPIRE RAILING INSTALLATION
ANGLE BRACKET: CUTTING DOWN PANELS
Step 1:
Determine Panel Length
1. Use 3/32” [2mm] Hex Wrench to tighten Set Screw & lock
Bracket at required angle position. As shown in Fig. 46.
2. Check to ensure that all posts are square and straight. Shim
posts as required.
3. Ensure that the Angle Bracket Cups are approximately
aligned.
4. With another person’s help, measure the distance from
the inside back of one cup to the inside back of the other
cup. This will be the panel length. As shown in Fig. 47 & 48.
Fig. 46
Bottom
of Bracket
Fig. 47
