7
INSPIRE RAILING INSTALLATION
Fig. 5
6’ panel maximum post spacing is 69-1/4”
[1759mm]
8’ panel maximum post spacing is 93-1/4”
[2369mm]
Step 4:
Mount Posts
1. Mark mounting hole locations and pre-drill a 3/8”
[10mm] hole.
2. Insert 3/8” [10mm] x 3-1/2” [89mm] Hex Head galvanized
bolts through 3/8”
[10mm] galvanized washer and post
base plate.
Note:
• Post Base Plate holes
MUST be positioned a minimum
1/2” [13mm] from edge of deck board.
• Use only 3/8” [10mm] Hex Head Galvanized Bolts. Lag
Screws
should
NOT be used. Secure each post
with four bolts.
Fig. 6
Fig. 7
OTP
and Proud Post: Max Post Spacing
• 8’
panel maximum post spacing is 93-7/8”.
• 6’
panel maximum post spacing is 69-7/8”.
Note: Do not exceed the maximum post spacing.
8’
Panel max post spacing 93-7/8”
6’
Panel max post spacing 69-7/8”
OTP
and Proud Post: Measuring The Panel Opening Length
• Measure the distance of the panel opening.
• Measure from the back wall of the bracket to the back wall of
the bracket on other post.
• Confirm that the measurements for the top brackets are the
same as the bottom brackets.
Measure the panel opening
Not here
Measure from
back of bracket
Check measurement with top
3/12
OTP
and Proud Post: Max Post Spacing
• 8’
panel maximum post spacing is 93-7/8”.
• 6’
panel maximum post spacing is 69-7/8”.
Note: Do not exceed the maximum post spacing.
8’
Panel max post spacing 93-7/8”
6’
Panel max post spacing 69-7/8”
OTP
and Proud Post: Measuring The Panel Opening Length
• Measure the distance of the panel opening.
• Measure from the back wall of the bracket to the back wall of
the bracket on other post.
• Confirm that the measurements for the top brackets are the
same as the bottom brackets.
Measure the panel opening
Not here
Measure from
back of bracket
Check measurement with top
3/12
Step 5:
Check Mounted Posts
1. Shim post as needed to ensure post is level.
Note:
• DO NOT exceed the maximum post spacing.
