13
INSPIRE RAILING INSTALLATION
Step 4:
Install I-support onto Bottom Rail
1. Position the I-support as close to the center of the bottom
rail as possible. The I-support should be inserted between
two pickets. As shown in Fig. 28.
2.
Use a Crescent Wrench to twist the I-Support into place As
shown in Fig. 29.
Step 5:
Install Panel Into Brackets
1. Install panel into brackets to confirm proper fit. Confirm
that pickets are parallel to posts. As shown in Fig. 30.
2. Pre-drill top and bottom bracket holes for screws using a
3/16” [5mm] drill bit.
3. Install T-25 Thread Cutting screws into brackets. As shown
in Fig. 31.
Note:
• Only one screw per bracket is needed to secure the
panel to the bracket.
• Screws should be installed on the same side of all
brackets.
Fig. 31
Fig. 30
Fig. 29
Fig. 28
