30
INSPIRE RAILING INSTALLATION
PANEL INSTALLATION
Step 1:
Mount I-Support To Bottom Rail
1. Locate the center of the bottom rail.
The I-support should
be centered and positioned between two pickets.
As
shown in Fig. 79.
2. Using the I-Support as a guide, mark the center of the 2
screw holes. As shown in Fig. 80.
3. Using a 3/16” [5mm] drill bit, drill though the outside wall.
4. Install the I-Support with the provided Phillips Head Thread
Cutting Screws. As shown in Fig. 81.
Fig. 79
Fig. 80
Fig. 81
Step 2:
Install Panel
1. Rake the panel near to the angle needed to install.
2. Drop the panel down into the brackets. Confirm that the
panel is level.
3. Remove any metal shavings after attaching the panel.
