11
INSPIRE RAILING INSTALLATION
Fig. 21
Fig. 20
Top View
Rail
Picket Plug
Step 2:
Assemble Panel
1. Level panels have 3 Support Pickets with threaded ends.
As
shown in Fig. 23.
2. Lay all panel components on a flat surface. S
upport Pickets
are labeled with removable stickers.
3. Place a Support Picket at both ends of the panel and one in
the center of panel.
4. Fasten Support Pickets to the
bottom rail
using included
T-25 M6 Flat Head Bolt. As shown in Fig. 24.
5. Insert standard pickets into bottom rail. As shown in
Fig. 25.
6. Install top rail by starting at one end of the rail with a
Support Picket. Loosely fasten one end Support Picket with
included
T-25 M6 Flat Head Bolt. As shown in Fig. 26.
7. Work your way down the top rail carefully inserting all
all remaining pickets into the top rail.
8. While keeping pickets engaged into the top & bottom rails,
finish tightening bolts into top rail support pickets.
9. Confirm all 6 support screws are fully fastened.
Fig. 22
Top View
Top Rail
Bottom Rail
Plug with “B” stamp
for bottom rail
