27
INSPIRE RAILING INSTALLATION
3. Position bracket centered flat on bottom post &
wood
2” x
4” (actual 1-1/2” [38mm] x 3-1/2” [89mm]).
As shown in
Fig. 68.
4. Check end picket positioning on both bottom brackets.
Pickets
SHOULD NOT be positioned inside the bracket cup
spacing. As shown in Fig. 69 & 70.
5. Adjust the unmounted bottom post’s position to allow
for correction to end picket position. As shown in Fig. 71.
The post to picket spacing
CANNOT exceed 4” [102mm].
6. Once bottom bracket spacing is confirmed, clamp the panel
onto bottom of both posts. As shown in Fig. 72.
7. Level the panel and clamp onto top of both posts.
8. Position top bracket onto bottom post and confirm picket
spacing on both top brackets. Be sure to have bottom face
of panel flush with inside bottom face of brackets.
As
shown in Fig. 73.
9. Once spacing is confirmed, mark bottom post hole
locations. As shown in Fig. 74.
Fig. 67
Fig. 68
Fig. 69
Fig. 70
Wood
2” x 4”
(actual 1-1/2”
x
3-1/2” [38mm
x 89mm])
