Fortress Bridge: Command-Line Interface
108
Bridges. Alternatively, you can specify only a subnet
and allow SAC to automatically generate all member IP
addresses within that subnet, including that of the root/
master Bridge.
The IP or subnet address you enter must fall within one
of these reserved ranges:
10.0.0.0
–
10.255.255.255
172.16.0.0
–
172.31.255.255
192.168.0.0
–
192.168.255.255
For example, the command below establishes the
network Access ID, leaves the rest of the security
settings at their defaults, configures an SSID and
channel setting for each radio, and specifies a subnet
for the deployment:
[GW]>
set sac start -a 0f0e0d0c0b0a0b0c -sa r2s1s2i3d4 -ca 161 -sg r1s0s9i8d7 -cg 11 -ipnw 172.24.0.0
[OK] Started SAC process successfully
When the SAC process starts, you can observe the
master/root Bridge’s front-panel
Stat1
LED flash amber,
while its
Stat2
LED lights solid amber. As each slave/
non-root Bridge receives the SAC parameters, its
Stat1
and
Stat2
LEDs flash amber in unison.
4
Check the status of the SAC process with the
show sac
command:
[GW]>
show sac
SwabSerialNum:24656196
SwabConfigID:19082
SwabSACRole:SAC_MASTER
SwabSACState:SAC_STOP_4SWAB
SwabSACVer:SAC_VER_PEGASUS_ARCH1
*********SACPeerInformation*********
SeriallNum|IpAddress|CfgID|PeerNum|PeerSACStatus|PeerSACState|PeerSACVer
24743196|172.24.0.3|0|1|SAC_PEER_CONFIRMED|SAC_FINISH_4PEER|SAC_VER_PEGASUS_ARCH1
24773196|172.24.0.4|0|2|SAC_PEER_CONFIRMED|SAC_FINISH_4PEER|SAC_VER_PEGASUS_ARCH1
The master Bridge confirms the
SAC_PEER
status of each
new slave Bridge and displays
SAC_FINISH
for each of
them that has successfully received SAC parameters.
5
Confirm that all of the slave/non-root Bridges in the network
are recognized as SAC Peers with
show sp
:
[GW]>
show sp
Peer1=>Serial_Number:24743196
Peer2=>Serial_Number:24773196
6
When the master Bridge shows
SAC_FINISH
for all slave
Bridges and you have confirmed that the SAC Peer list is
complete, save the network configuration with
set sac
stop
:
Summary of Contents for ecure Wireless Access Bridge
Page 2: ......
Page 18: ......
Page 47: ...Fortress Bridge Configuration 37 NOTE For security ...
Page 87: ......