Configuration Overview
Page 9
FortiFone User Guide
Configuration Overview
The phone supports the access and configuration of many parameters directly from the
Telephone User Interface. To access the
Configuration
menu, tap the
Menu
softkey while the
phone is not in use.
The
Configuration
menu consists of several sub-menus as listed below:
• Status
• Features
• Settings
• Messages
• History
• Directory
• USB Recording
Status
The
Status
page includes the IP address, MAC address and firmware of the phone. It also
provides more details about the phone, the network connections and the registration status.
Features
The following features of the FON-C71 are used to enable a redial state, change History settings
and to run certain diagnostics for troubleshooting.
Auto redial
You can enable auto redial to automatically redial a phone number when the called party is
busy. You can also configure the number of auto redial attempts and the time to wait between
redial attempts.
To configure auto redial via phone user interface:
1.
Tap
Menu
>
Features
>
Auto Redial.
2.
Tap the
or
softkey to select
Enable
from the
Auto Redial
field.
3.
Enter the desired time (in seconds) in the
Redial Interval
field.
The default time interval is 10 seconds.
4.
Enter the desired number of redial attempts in the
Redial Times
field. The default value is 10.
5.
Tap the
Save
softkey to accept the change or the
Back
softkey to cancel.
