Epsilon-8100 User Manual Revision A.3
www.diamondsystems.com
Page 24
7.1.2 Port Configuration
Individual ports can be configured as follows:
1. Connect to the web interface of EPS-8100 switch
2. Navigate to Configuration -> Ports
3. Each port can be set for one of the following configurations
a. Disabled
–
Disables the switch port operation
b. Auto
–
Port auto negotiating speed with the link partner and selects the highest speed that is
compatible with the link partner
c. 10 Mbps HDX
–
Forces the cu port in 10Mbps half-duplex mode
d. 10 Mbps FDX
–
Forces the cu port in 10Mbps full-duplex mode
e. 100 Mbps HDX
–
Forces the cu port in 100Mbps half-duplex mode
f.
100 Mbps FDX
–
Forces the cu port in 100Mbps full duplex mode
g. 1 Gbps FDX
–
Forces the port in 1Gbps full duplex
4. After port configuration is done click on save
5. To save these settings permanently navigate to Maintenance -> Configuration -> Save Startup-config
click on Save startup configuration
Figure 4
–
Port configuration