Epsilon-8100 User Manual Revision A.3
www.diamondsystems.com
Page 13
6.3 Help Utility
You may get help by pressing the
?
key or entering
help
. The help info depends on the context:
At top level, a list of command groups is displayed.
At group level, a list of the command syntaxes for the current group is displayed.
If the help command is issued for a specific command, the command syntax and a description of the
command are shown.
6.4 Entering Commands
Commands are not case-sensitive.
You may use the horizontal arrow-
keys and to move the cursor within the command you are
entering.
You may use the backspace key (provided you are using a terminal that sends the BS (8) character when
the backspace key is pressed) to delete chars from the command you are entering.
You may use the vertical arrow-
keys and to scroll through a command history buffer of the latest 20
commands issued.
6.5 General Command Groups
The following groups of general commands are available in the command line interface (CLI).
# ?
clear Reset functions
configure Enter configuration mode
copy Copy from source to destination
debug Debugging functions
delete Delete one file in flash: file system
dir Directory of all files in flash: file system
disable Turn off privileged commands
do To run exec commands in config mode
dot1x IEEE Standard for port-based Network Access Control
enable Turn on privileged commands
exit Exit from EXEC mode
firmware Firmware upgrade/swap
help Description of the interactive help system
ip IPv4 commands
logout Exit from EXEC mode
more Display file
no Negate a command or set its defaults
ping Send ICMP echo messages
reload Reload system.
send Send a message to other tty lines
show Show running system information
terminal Set terminal line parameters
#