Förster-Technik TAK5-CH2-25, Original Operating Instructions

Page: 40 / 141

40 Operating the automatic feeder
When you press , the message Exit automatic mode? appears in the display. When you
confirm the message by choosing , you switch the automatic feeder from automatic mode
to manual mode. The Auto LED goes out.
The automatic feeder automatically returns to automatic mode after 20 minutes of inactivity.
The Auto LED lights up green.
You can also actively switch the automatic feeder back to automatic mode. Press until the
message Start automatic mode? appears in the display. Confirm the message by choosing
. The automatic feeder returns to automatic mode. The Auto LED lights up green.
You can start the following functions manually:
•
Extra portion . Here you can dispense extra portions with and without additives.
•
Mixer: drain? . The mixer is emptied via the mixer drain valve or via the teat of the feeding
pump.
•
Milk: suck in? . Here you can remove air from milk lines.
•
Milk: start? . You open the milk valve and start the milk pump here.
•
HE water: start? . Here you fill the stainless steel coil of the heat exchanger with water us-
ing the milk pump.
•
Boiler water: start? . You fill the boiler with water here.
•
Mixer: start? . You start the mixer here.
•
Feeding station . You open the feeding station valve(s) here.
•
HE: fill? . You automatically fill the heat exchanger with water here.
•
Hoses: open? . Here you can open several valves simultaneously in order to completely
drain all the lines of the automatic feeder of water.