122
Failures and warnings
You rectify the error as follows:
1. Choose
> Animal management > Transmitters
to go to the
Edit
submenu.
2. Select the transmitter number to be deleted and confirm
Delete
by choosing
.
Note:
You can only delete transmitter numbers from calves that are not registered (= status:
available).
3. Confirm
delete warning?
by choosing
.
7.2.12 Database
The
Database warning
appears in your display if there are errors in your database. You must
contact a service technician immediately.
7.2.13 Checking the SD card (15-key hand terminal only)
The
Check SD card
warning appears in your display:
•
If data is to be saved manually, but no SD card is present.
•
If data is to be saved manually, but the SD card is currently write-protected.
•
If data is to be saved automatically but the SD card is full.
•
If data is to be saved automatically but the SD card is currently write-protected.
7.3
Other failures and messages
7.3.1
Automatic feeder
7.3.1.1 Starting program
The message
High Vxx.xx starting program
appears when the control program of the auto-
matic feeder starts.
Wait until the automatic feeder is ready to operate.
7.3.1.2 Initialization of the feeder
The message
first startup Press enter to start installation
appears in the display in the fol-
lowing cases:
•
When the automatic feeder starts for the first time.
•
If the computer card must be replaced due to a hardware defect.
Summary of Contents for TAK5-CH2-25
