formlabs Fuse Sift Manual Download | Manualshive

Page: 26 / 50

background image

26

4.6.4

Connecting with USB

Use the included USB cable for connecting a computer directly to the machine.
To connect with USB:
1. Plug one end of the USB cable into the USB port on the back of the unit.
2. Connect the other end of the USB cable to a computer’s USB port.

4.7

Updating firmware

Formlabs regularly releases updated firmware to fix bugs and improve functionality. Download
the latest firmware version for your Formlabs device with PreForm, then upload and install the
firmware file on the machine. Review the

firmware downloads and release notes

about the improvements that come with each version’s release.

To update the firmware via PreForm:

1.  Open PreForm.
2.  Connect the machine to the computer via USB or connect the device to an Ethernet network.
3.  Click the < button. The

Job Info

dialog box opens.

4. Click the machine’s serial name. The

Job Setup

window opens.

5. Click the

Select Sift

arrow. The

Sift List

window opens.

6. Click the machine’s serial name. The

Sift Details

window opens.

7. Click

Update

in the upper-right corner of the

Sift Details

window. The

Firmware Update

window opens.

8. Follow the on-screen instructions to download the latest firmware and then upload the file

to the machine. To upload firmware, the device must be connected to the computer via
USB or the machine must be connected to an Ethernet network.

9. The machine may automatically recognize that you have sent a firmware update. Tap

Continue

on the touchscreen to finish the installation.

10. If you are not prompted to

Continue

, continue the firmware update manually. Tap

Settings

> System > Firmware Update

.

11. After the firmware update installs, confirm the system restart on the touchscreen or wait 30

seconds for an automatic restart.

4.8

Transporting the machine

For detailed guidance and visual assistance, visit

support.formlabs.com

.

Refer to section

4.3.1 Receiving

for product weight and dimensions. Keep the packaging for

transportation or shipping.

The complete packaging kit consists of:

•

one (1) pallet, wood and foam

•

one (1) inner C-fold, cardboard

•

four (4) tie down brackets, steel

•

one (1) outer C-fold, cardboard

•

twelve (12) M6 × 45 mm lag bolts

•

one (1) topper, cardboard

•

one (1) protective bag, plastic

•

two (2) lifting straps

4.8.1

Preparing for transportation

Before repackaging, vacuum the workspace and empty the hoppers. Remove the powder
cartridge, parts bin, surface grate, tool shelf, build chamber, power catch, and all tools.

«
...
24
25
26
27
28
...
»

Summary of Contents for Fuse Sift



















































Reviews:

No comments

Related manuals for Fuse Sift

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 750

Brand: QMS Pages: 24

Brand: Canon Pages: 66

Brand: Radio Shack Pages: 62

Brand: Raise3D Pages: 32

Brand: Panasonic Pages: 169

Brand: Oki Pages: 126

Brand: Xerox Pages: 8

Brand: Oki Pages: 349

Brand: Oki Pages: 4

Brand: Pantum Pages: 115

Brand: DataCard Pages: 130

Brand: GCC Technologies Pages: 2

Brand: Oki Pages: 57

Brand: A&D Pages: 31

Brand: MUTOH Pages: 148

Brand: LulzBot Pages: 3

Brand: SPRT Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands