![formlabs Form Wash L Manual Download Page 36](http://html1.mh-extra.com/html/formlabs/form-wash-l/form-wash-l_manual_2320172036.webp)
34
7
Troubleshooting
For detailed guidance and visual assistance, visit
7.1
Collecting diagnostic logs
The Form Wash L maintains diagnostic logs to provide detailed information about the machine
that may expedite issue investigation. After experiencing any error or unusual behavior on the
Form Wash L, include the diagnostic logs with other relevant observations and details when
contacting
or a
. The options for sharing diagnostic
logs vary depending on the machine’s connection type.
7.2
Performing a factory reset
A factory reset erases diagnostic information and custom settings, including networked
connections. Do not perform a factory reset before contacting Formlabs Support or a
certified service provider. The stored diagnostic information may be helpful to Formlabs
Support or a certified service provider to assist with troubleshooting.
7.3
Cleaning after a chemical spill
Refer to section
3.5.2 Chemical spills
for more information on developing a spill response
procedure. Keep emergency tools in a known, accessible location. When working with isopropyl
alcohol or other flammable chemicals, consider purchasing a flammable solvent cleanup kit.
Required supplies:
•
Apron
•
Non-reactive nitrile gloves
•
Safety glasses
•
Shoe covers
7.3.1
Isopropyl alcohol (IPA)
When handling isopropyl alcohol, always consult the safety data sheet (SDS) from the
isopropyl alcohol supplier as the primary source of information. Handle isopropyl alcohol
with gloves in a well-ventilated area. Keep away from heat, sparks, and open flame. Isopropyl
alcohol evaporates rapidly, so keep the wash bucket and bottles closed whenever possible.
Spilled IPA presents an immediate fire and health hazard. IPA spills must be cleaned up
immediately. Use only disposable supplies to clean up an IPA spill to avoid risk of fire.
Immediately after an IPA spill, do the following:
1. Put on a pair of disposable nitrile gloves.
2. If a wash cycle is in progress, cancel the wash on the touchscreen.
3. Unplug the device from its power source.
4. Absorb excess IPA with paper towels.
5. Clean up any remaining residue using wet paper towels.
6. Dispose of any tools used to clean up the spill (paper towels soaked with IPA, gloves coated
in IPA) with hazardous waste according to local regulations.
NOTICE
DANGER
Summary of Contents for Form Wash L
Page 1: ...Manual Form Wash L...
Page 2: ......
Page 6: ......
Page 46: ...Original English instructions November 2021 Formlabs...