formlabs Form Wash L, Manual

Page: 15 / 46

Safety | 13
3.1 Component and subsystem safety
3.1.1 General
The Form Wash L is a professional appliance that includes electronic components. As with
any such appliance:
• Do not operate the device with a damaged cord or plug.
• Ensure reliable grounding before connecting the device to power.
• Always disconnect power before cleaning.
• Only use well-maintained equipment.
• Operate on a clear and level surface.
Always remove solvent from the wash bucket before removing the wash bucket or
storing or transporting the Form Wash L.
•
Use the included electric siphon pump to avoid overfilling or spilling solvent. For more
information about using the siphon pump, visit
support.formlabs.com .
3.1.2 Resin
Resin and solvents may cause skin irritation or an allergic skin reaction. Wear
gloves when handling liquid resin, liquid solvent, or resin-coated surfaces. Wash
skin with plenty of soap and water.
Consult the safety data sheet (SDS) as the primary source of information to
understand safety and handling of Formlabs resins. Respect Formlabs resin like any
household chemical. Follow standard chemical safety procedures and Formlabs resin
handling instructions. In general, Formlabs resin is not approved for use with food,
drink, or medical applications on the human body. Refer to the safety data sheet (SDS)
for each specific resin as well as support.formlabs.com for more detail.
3.1.3 Radio interference
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to CFR Title 47, Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at their own expense.
Changes or modifications to this product not authorized by Formlabs could void the electromagnetic
compatibility (EMC) and wireless compliance and negate your authority to operate the product.
This product has demonstrated EMC compliance under conditions that included the use
of compliant peripheral devices and shielded cables between system components. It is
important that you use compliant peripheral devices and shielded cables between system
components to reduce the possibility of causing interference to radios, televisions, and other
electronic devices.
NOTICE
WARNING
NOTICE