![formlabs Form Wash L Manual Download Page 17](http://html1.mh-extra.com/html/formlabs/form-wash-l/form-wash-l_manual_2320172017.webp)
Safety |
15
•
Apron
•
General purpose cleaner (e.g., glass cleaner)
•
Isopropyl alcohol (IPA), 90% or higher, and/or tripropylene glycol monomethyl ether (TPM)
•
Low-fiber paper towels
•
Non-abrasive microfiber cloth
•
Non-reactive nitrile gloves
•
Safety glasses
•
Shoe covers
3.4
Sensitive components
The Form Wash L has multiple components that are vulnerable to permanent damage if not
periodically inspected and properly maintained. Using any tools, cleaning agents, or methods
not mentioned in this manual may result in permanent damage to these components.
•
Wash bucket and impellers:
Removable container holds a maximum of 43 L (11.4 US gal)
of solvent. A rotating impeller at the bottom circulates the solvent.
•
Solvent monitor:
A sensor measures the amount of resin dissolved in the solvent, allowing
the Form Wash L to determine when the solvent needs to be replaced.
Refer to section
6.2
for more information.
3.5
Emergency and exceptional situations
Formlabs has made every effort to provide updated safety data sheets (SDS) for every resin
product, in accordance with the latest government guidelines. Always consult the safety data
sheet (SDS) as the primary source of information to understand safety and handling of Formlabs
materials and required accessories. Visit
to download safety data sheets
for Formlabs materials.
3.5.1
Fire
Do not use water to extinguish an electrical fire. Dousing an electrical fire with water
increases the risk of electrocution, and may cause the fire to spread by allowing
electricity to conduct across additional flammable surfaces.
If a localized fire develops either inside or outside of the machine, immediately take the
following actions.
If the fire is inside the device:
1. Immediately disconnect the machine from its power source.
2. If the outer lid is open, close it if possible.
°
If the fork is up and/or a part inside the Form Wash L is on fire, do not close the outer lid.
Place a fire blanket over the unit.
3. Use an ABC fire extinguisher to cover the affected area generously.
If the fire is too large to control:
1. Immediately leave the area and close the door of the room behind you.
2. Evacuate the building according to your organization’s emergency protocols.
3. Call emergency services once you have reached a safe distance from the fire.
3.5.2
Isopropyl alcohol (IPA)
DANGER
Summary of Contents for Form Wash L
Page 1: ...Manual Form Wash L...
Page 2: ......
Page 6: ......
Page 46: ...Original English instructions November 2021 Formlabs...