formlabs Form Wash L, Manual

Page: 20 / 46

18
To unbox the machine:
1. Position the packaging near the designated location, leaving enough room for two people
to comfortably maneuver throughout the area. Stand the packaging upright to ensure it
is level.
2. Lift the outer cardboard box off of the lower carrier tray.
3. Open the lid of the machine and remove the accessories box.
4. Remove the foam inserts from the top of the machine.
5. Use the provided handles on the carrying slings to lift the machine out of its carrier tray.
6. Carefully move the machine onto its workspace.
If you need to readjust the Form Wash L, use the carrying slings to pick the machine
back up. Do not pick up the Form Wash L without the carrying slings.
7. Tilt each side of the machine up slightly to remove the carrying slings.
Keep the original packaging for transportation or shipping.
4.4 Accessing the serial name
The serial name is a unique identifier used to track the history of manufacturing, sales, and
repair. The serial name for the Form Wash L is located on the back of the unit in the format
AdjectiveAnimal and is accessible via the touchscreen.
To access the serial name on the touchscreen:
1. If you are currently viewing a submenu on the touchscreen, tap the < arrow until you return
to the home screen. The home screen lists your current wash settings and the device status.
2. The serial name is listed in the top-left corner.
4.5 Installing the machine
For detailed guidance and visual assistance, visit support.formlabs.com .
After selecting a location, connect the device to a power source and install the Wi-Fi antenna
before turning on the device.
4.5.1 Installing the Wi-Fi antenna
Install the Wi-Fi antenna to connect the machine to a wireless network.
To install the Wi-Fi antenna, screw the Wi-Fi antenna onto the jack on the back of the unit.
4.5.2 Connecting the cables
Plug the included power cable into the power port on the back of the unit and connect the
power cable to a circuit.
For Ethernet, connect the machine to your LAN. Refer to section
4.6 Setting up a network
connection for more information.
4.5.3 Filling the wash bucket with solvent
Fill the Form Wash L with your choice of compatible solvent before use.
To fill the wash bucket:
1. Open the outer lid.
2. Pour or siphon solvent into the wash bucket to fill to a level between the minimum and
maximum fill lines.
CAUTION