formlabs Form Wash L, Manual

Page: 23 / 46

Preparation and setup | 21
• 1 outer carton, cardboard • 1 upper insert, foam
• 1 carrier tray, cardboard • 2 carrying slings, cardboard
• 1 carrier tray insert, foam • 1 accessories box, cardboard
4.8.1 Preparing for transportation
Before repackaging, drain the wash bucket of remaining solvent, clean it, and fully dry it. Ensure
the outer shells are clean and dry.
The Form Wash L is a heavy object. A two-person lift is required to prevent injury
and avoid damage to the machine. Always use the included cardboard slings when
moving the device.
Do not ship the machine with any solvent inside the wash bucket. Solvent left in
the machine can leak during transit, which may result in additional fees or void the
warranty.
To prepare the machine:
1. Always empty the wash bucket and remove any printed parts before moving or packaging
the machine.
2. Wipe residual solvent from the wash bucket and other internal components.
Do not ship the machine with any solvent inside. Solvent left inside the machine can
leak during transit, which may result in additional fees, void the warranty, or present a
safety hazard.
Do not ship the Form Wash L with any loose items stored inside the machine. Loose
items can shift during transit and damage sensitive components, which may result in
additional fees or void the warranty.
3. Store solvent in a sealable container appropriate for the solvent of your choice.
When shipping a machine to Formlabs or a certified service provider for replacement
or repair, the power cable and other accessories should not be shipped and will not be
returned after service. Original packaging is required for warranty service. Contact Formlabs
Support or a certified service provider for unique guidance on shipping requirements.
4.8.2 Packaging
Thoroughly read and follow the instructions to properly package the machine. Skipping any
of the following steps may result in shipping damage and void the warranty.
To package the machine:
1. If you have previously collapsed the machine’s outer cardboard carton, start by reassembling
and securely taping the box.
2. Tilt one side of the machine up and slide a carrying sling underneath. Repeat with a second
sling under the other side of the machine.
CAUTION
NOTICE
NOTICE
NOTICE