formlabs Form Wash L, Manual

Page: 13 / 46

Introduction | 11
2.3.2 Additional package components
Power cable: Provides power to the Form Wash L.
Wi-Fi antenna: Allows the machine to connect to a network via Wi-Fi.
Non-reactive nitrile gloves: Wear gloves when handling liquid resin, resin-coated surfaces,
or solvent. Wash skin with plenty of soap and water
Rinse bottle: Remove resin trapped in cavities and internal channels of prints. Use clean
solvent. Formlabs recommends isopropyl alcohol.
Flush cutters: Snip to separate prints from their supports. Cut with the flat side on the
prints’ surface for minimal support marks.
Scraper: Remove prints from the build platform. Do not use the scraper to clean the resin
tank interior.
Removal tool: Pry under the raft to remove prints from the build platform. Do not use the
removal tool to clean the resin tank interior.
Electric siphon pump: A battery-powered siphon pump for moving solvent into and out
of the wash bucket. The pump has a dedicated storage slot underneath the wash bucket.
2.4 User interface
For detailed guidance and visual assistance, visit support.formlabs.com .
The Form Wash L display is a touchscreen interface. The touchscreen displays wash information
(wash time and selected material), settings, and error messages. The touchscreen serves as
the user interface for the machine.
The home screen displays the current solvent, saturation rate, wash type and time, and
serial name.
The following screens and options are accessible via the home screen on the Form Wash
L display:
Settings • Connectivity
• Update Firmware
• Washing Guidelines
• Connect to Dashboard
• Onboarding
• Machine Sound Volume
• Tilt Mode
• Reboot
Solvent • Current Solvent
• Saturation Rate
• Number of Washes
• Replace Solvent
Select Wash Solvent • IPA
• TPM
• Custom
Wash Preset • Quick Wash
• 5 min
• Default Wash
• 10 min
• Long Wash
• 20 min
• Custom
• Guidelines
Start • Start a wash cycle.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8