formlabs Form Cure L, Installation And Usage Instructions

Page: 34 / 40

32
8 Disassembly and repair
All steps that involve opening the machine and/or investigating internal components
should be done by skilled persons under the guidance of Formlabs Support or a
certified service provider. Any damage resulting from attempting disassembly and/
or repair without prior authorization from Formlabs Support or a certified service
provider is not covered by warranty. When removing the exterior paneling, disconnect
the machine from its power source before maintenance.
8.1 Tasks
Contact Formlabs Support or a certified service provider to receive repair instructions and
authorization, including how to disassemble or remove the exterior paneling.
Task Frequency
Replacing the LED modules The LEDs have stopped functioning or
behave erratically.
Replacing the heaters The heater modules have stopped functioning or
behave erratically.
Any other maintenance or repair tasks not listed in section 6 Maintenance requires servicing
the machine. Contact Formlabs Support or a certified service provider to request service or
an RMA (short for “return to manufacturer authorization”).
WARNING