formlabs Form Cure L, Installation And Usage Instructions, Page: 18 / 40

16
3.5.2 Fire
Do not use water to extinguish an electrical fire. Dousing an electrical fire with water
increases the risk of electrocution, and may cause the fire to spread by allowing
electricity to conduct across additional flammable surfaces.
If a localized fire develops either inside or outside of the machine, immediately take the
following actions.
If the fire is inside the device:
1. Immediately disconnect the machine from its power source.
2. If the door of the Form Cure L is open, close its door if possible.
°
If a part inside the Form Cure L is on fire, do not close its door. Place a fire blanket over
the unit.
3. Use an ABC fire extinguisher to cover the affected area generously.
If the fire is too large to control:
4. Immediately leave the area and close the door of the room behind you.
5. Evacuate the building according to your organization’s emergency protocols.
6. Call emergency services once you have reached a safe distance from the fire.
3.5.3 Isopropyl alcohol (IPA)
When handling isopropyl alcohol, always consult the safety data sheet (SDS)
from the isopropyl alcohol supplier as the primary source of information. Handle
isopropyl alcohol with gloves in a well-ventilated area. Keep away from heat,
sparks, and open flame. Isopropyl alcohol evaporates rapidly, so keep the wash
bucket and bottles closed whenever possible.
3.5.4 Resin
Never ingest resin in liquid or solid form. If swallowed, immediately call a poison
center or medical professional. Contact Chemtrec at +1 800 424 9300 for global 24-
hour emergency assistance.
Promptly clean and inspect the device after a resin spill to minimize any cosmetic or
functional damage to the machine. If you have experienced an accidental resin spill,
document the problem with photos and clean the device as best as possible. Contact
Formlabs Support or a certified service provider as soon as possible.
DANGER
DANGER
WARNING
NOTICE