22
5
Usage
5.1
Operational environment
•
Ventilation:
No specific requirements
•
Temperature:
18–28 °C (64–82 °F)
•
Power:
°
Dedicated power outlet and circuit capable of delivering 8 A of current (for 220–240
VAC circuits) or 15 A (for 100–120 VAC circuits)
°
Easy access to the power switch of the device
•
Location:
Dry, indoor
•
Altitude:
Maximum 2000 m (6561.7 ft)
•
Humidity:
Low ambient humidity
•
Mains supply voltage fluctuations:
≤ 10%
•
Pollution degree of intended environment:
2
5.2
Post-curing printed parts
Many resin types require post-curing to achieve their optimal mechanical properties or as
a step in producing a biocompatible printed part. The Form Cure L helps ensure consistent
post-curing by rotating printed parts during the post-cure cycle and exposing the part to light
from all directions. For detailed guidance and visual assistance, visit
.
5.2.1
Inserting washed and dried printed parts
Fully dry all printed parts after washing. Check
all internal and external surfaces, because
curing non-dried parts may trap solvent inside
the part, prevent parts from strengthening, and
affect quality. Once parts are dry:
•
Open the door.
•
Distribute parts on the round turntable. Place
parts with the most even spacing possible to
allow light and heat to reach all areas.
•
Gently close the door.
The Form Cure L contains two heaters that heat inserted parts during post-curing.
Take care when inserting and removing parts from the Form Cure L, because the
turntable may be hot.
5.2.2
Setting the time and temperature
The Form Cure L has presets for each resin type that you can select through the touchscreen.
When Formlabs releases new resins, new resin formulations, or new layer thicknesses, update
the firmware on your Form Cure L for the new presets.
To set the post-cure time and temperature based on resin type:
1. Tap
Cure
. The
Resin Profile
menu appears.
2. Select the appropriate material profile on the touchscreen. If the resin has multiple versions
or post-curing profiles, tap the desired version or profile.
CAUTION
Summary of Contents for Form Cure L
Page 1: ...Manual Form Cure L ...
Page 2: ......
Page 6: ......
Page 40: ...Original English instructions November 2021 Formlabs ...
