formlabs Form Cure L, Installation And Usage Instructions

Page: 20 / 40

18
2. Lift the outer cardboard box off of the lower carrier tray.
3. Remove the foam inserts from the top of the machine.
4. Use the provided handles on the carrying slings to lift the machine out of its carrier tray.
5. Carefully move the machine onto its workspace.
If you need to readjust the Form Cure L, use the carrying slings to pick the machine
back up. Do not pick up the Form Cure L without the carrying slings.
6. Tilt each side of the machine up slightly to remove the carrying slings.
7. Open the door.
8. Remove the turntable from the upper packing foam. Place the turntable on its mount.
9. Close the door.
Keep the original packaging for transportation or shipping.
4.4 Accessing the serial name
The serial name is a unique identifier used to track the history of manufacturing, sales, and
repair. The serial name for the Form Cure L is located on the back of the unit in the format
AdjectiveAnimal and is accessible via the touchscreen.
To access the serial name on the touchscreen:
1. If you are currently viewing a submenu on the touchscreen, tap the < arrow until you
return to the home screen. The home screen lists your current post-cure settings and the
device status.
2. The serial name is listed in the top-left corner.
4.5 Installing the machine
For detailed guidance and visual assistance, visit support.formlabs.com .
After selecting a location, connect the device to a power source and install the Wi-Fi antenna
before turning on the device.
4.5.1 Connecting the cables
Plug the included power cable into the power port on the back of the unit and connect the
power cable to a dedicated circuit.
For Ethernet, connect the machine to your LAN. Refer to section
4.6 Setting up a network
connection for more information.
4.5.2 Installing the Wi-Fi antenna
Install the Wi-Fi antenna to connect the machine to a wireless network.
To install the Wi-Fi antenna, screw the Wi-Fi antenna onto the jack on the back of the unit.
4.5.3 Turning on
To turn on the machine:
1. Plug the included power cable into the power port on the back of the unit and connect the
power cable to a dedicated circuit.
2. Flip the breaker switch on the back of the unit to the ON position to turn on the machine.
3. As the Form Cure L initializes, the Formlabs logo with a progress bar appears on the
touchscreen, followed by the onboarding process. Follow the on-screen prompts to finish
setting up the machine.
CAUTION