52
Chapter 3 Advanced Operation
3
Loosen the guide fixing screw.
[a]
[a]
4
Stack the single-folded paper on the
paper feed tray with the folded line
toward the non-operator’s side.
The stacking amount is equivalent to about
half (25 mm/0.98 inch) [a] of the height of the
paper feed guide on the folding side.
A feed error may occur if the stacking
height of single-folded paper is largely
different on both sides even though the
stacking height of single-folded paper is
25 mm/0.98 inch or less. If so, decrease the
number of sheets stacked on the paper
feed tray to reduce the difference on both
sides of paper.
5
Attach the paper feed guide lightly to the side of the paper and tighten the fixing
screws.
6
Set the trail edge guide unit to the rear end of paper.
The trail edge guide unit must be set slightly apart from the paper.
7
Set the air volume of [Separating Air], [Pickup Air] and [Side Air] on the [Air Adjust]
screen.
Set the air volume referring to “Air Adjustment Table” (p.39)) to the set numerical value + [5].
