46
Chapter 3 Advanced Operation
• The changed value is cleared when power is turned off. To save the changed value, see “Saving the
Saving the adjusted value
If you save the adjustment value for the next time you use the same paper, you can perform folding
operation under the same adjustment value as the one that is saved at this time.
• For standard folding of standard paper, touch the
key. —> Press and hold the
key to save
the adjustment value.
• For standard folding or custom folding of non-standard paper, touch the
key. —> Touch the
key. —> Select and save the saved data number of custom folding.
1-3. Deformed folding
The paper may not be folded properly due to the characteristics of paper. In such cases, check the following
points.
• Do not use paper outside the specifications.
Particularly, deformed folding occurs
frequently in the use of thin, flimsy paper not
appropriate.
• Decrease the processing speed when
deformed folding occurs for thin and flimsy
paper.
• Separate paper well prior to stacking.
• Stack paper on the paper feed tray after
aligning well, and set the paper feed guides at
the correct positions. Also tighten the fixing
screws of the paper feed guides firmly.
2. Standard Folding of Non-Standard Paper
Standard folding of non-standard paper is a method to perform paper folding by saving paper lengths other
than standard paper and selecting the folding mode of standard folding.
Paper other than the six standard paper(*) is called non-standard paper.
(*) Five standard paper sizes For North America
The foldable sizes are as follows. (width x length)
Length : 182.0 to 457.2 mm/
7.17 to 18.00 inches
Width :
120.0 to 311.0 mm/
4.73 to 12.24 inches
Paper feed
direction
Maximum : 311.0 x 457.2 mm/12.24 x 18.00 inches
Minimum :120.0 x 182.0 mm/4.73 x 7.17 inches
When performing gate fold, the maximum paper
length is 432.0 mm/17.00 inches.
•
Standard paper which is stacked on the paper feed tray in the long edge feeding direction is
considered non-standard paper.
•
The paper sizes which can be used may vary with the paper type, thickness, and printing
state.
