![background image](http://html1.mh-extra.com/html/formax/cut-true-31h/cut-true-31h_operators-manual_2320005014.webp)
6. POWER SUPPLY
Figure 14. Location of the nameplate
Data on the plate:
- 400V power supply
- 50-60 Hz frequency
- 3 kW power
- 20 A protection
WARNING
The data on the plate must correspond to the current parameters in the mains!
Parameters of frequency converters (inverters) are set by the cutter
manufacturer and can not be changed!
Cutter should be grounded!
Summary of Contents for Cut-True 31H
