![background image](http://html1.mh-extra.com/html/formax/cut-true-31h/cut-true-31h_operators-manual_2320005029.webp)
Figure 30 B - the adjustment screw does not protrude below the protrusion 2 in the
cutter bar -
correct position
.
Figure 30 A - the adjusting screw protrudes below the projection 2 in the cutter bar -
incorrect position
, unscrew the screw.
WARNING
The assumed knife must be able to support its upper surface with the
projection of the cutter bar. Failure to comply with this condition may result in
a situation when the assumed knife is higher than removed, serious
overloading and even damage to the machine.
Figure 30. Position of adjustment screws.
8.1.2.2. Remove the knife from the packaging (Figs. 29a to 29d)
8.1.2.3. Holding the transport handles 1, insert the knife 2 into the cutter so that the
transport handles screwed into the knife hit the cutouts in the cutter bar 3. (Fig. 31)
Summary of Contents for Cut-True 31H
