Seating
Driver’s Seating
The seat itself may or may not be equipped with the lumbar support system. The following
information will help you adjust to fit your individual needs.
CAUTION
:
You can lose control of the vehicle if you are trying to adjust the driver’s
seat while the vehicle is moving. The sudden movement could startle or confuse you, or
make you push a pedal when you don’t want to. ADJUST THE DRIVER’S SEAT ONLY
WHEN THE TRANSMISSION IS IN THE “PARK POSITION” and always make sure the
seat is locked in place.
Forward and Back
1. Grab the slide release bar located underneath the front of the seat.
2. Pull up on the handle and slide the seat to the desired position.
3. Release the handle to lock the seat in place.
CAUTION
:
All seat release mechanisms must be firmly engaged and locked when
the unit is in motion to avoid the seat to suddenly move and startle or confuse you,
which could result in you losing control of the vehicle.
Reclining the Seat Back
1. Grab the seat recline adjustment (hook-shaped lever) found on the lower left-hand side of the
seat.
2. Lift the lever and lean back or forward to adjust to the desired position.
3. Release the lever to lock the seat back in place.
CAUTION
:
Sitting in a reclined position when your vehicle is in motion can be
dangerous. Even if you buckle up, your safety belts can’t do their job when you’re
reclined. NEVER recline your seat while the vehicle is in motion.
Lumbar Support
When the driver’s seat is equipped with a lumbar support system, the knob in which you control
the system can be either on the left or right side of the seat bottom, depending on the seat style.
For more support, increase the firmness by turning the support control knob clockwise.
For less support, increase the softness by turning the control knob counterclockwise.
26
Summary of Contents for Starcraft Bus
Page 30: ...29 NOTES ...
