27
Passenger Seating
Passenger Rear Seats
NOTE: The number of seats for each model varies according to the order, the length of the bus
and other factors, such as the Gross Vehicle Weight, etc. (listed on your front door jamb). The
number of seats determines the amount of passengers allowed. The tag on the driver’s doorjamb
notes the number of seat positions for the vehicle. There are several styles and types of rear
passenger seats that can be provided for you unit. You may have one or more of the following
features provided in your bus. The seat frames are attached to the seat track mounted into the
floor area and the sidewall.
Armrest
Flip Style
To use, simply lift the arm and push upward. To reposition for use, push the armrest down.
Fold-Down Style
“Non Use Position”
(folded completely down)
Pull arm backwards and then push the arm down.
“Use Position”
pull arm up until it clicks and locks into place
Seat Recline/Side Release Handle
1. Grab hook-shaped lever located at the outer seat bottom cushion.
2. Pull the handle up and lean back or forward until you reach the desired position.
3. Release handle to lock into place.
Other Types of Seating and Seating Operations
Side Slide Seat, To Slide the Seats Out For More Room
1. Grab the slide handle located under the seat
2. Push the handle toward the inner side of the seat(s).
3. Push outward or inward depending on the position desired.
4. Release the slide handle to lock into position.
Flip Seats
To flip seat bottom up or down
1. Grab the handle under the front corner of seat and pull forward.
2. Pull seat to upright position and release the handle to lock in place.
To release seat
1. Grab the handle
2. Pull forward lower the cushion and release handle to lock into place.
Summary of Contents for Starcraft Bus
Page 30: ...29 NOTES ...
