23
Electrical Systems
Using switches located on your console you can easily control all of the functions for the lights,
electronics, heat and air. The electronics are accessible by controls located overhead or by using
a voyager system if installed.
Factory Installed Lights, Signals and Equipment
The information for care and maintenance for the factory installed components such as the
dashboard lights and gauges including horn, turn signals, headlights, fuses, circuits, bulbs,
wiring, etc. can be found in the chassis owner’s manual provided with your unit.
It is recommended that a daily inspection of the headlight, turn signals, warning lights, etc. be
performed and any faulty items be replaced or repaired as needed.
Switch Panel
Depending on the option content in your unit, you may find a variety of toggle switches,
indicator lights and the A/C knobs; each is labeled as to its function.
Switch Panel Maintenance and Care
A daily inspection of the interior lights, including reading lights, step well lights, entry lights and
any emergency lights should be performed.
Replace any bulbs that may have burnt out or repair or have repaired any wiring.
During a regular scheduled maintenance of your unit, preferably every 12,000 miles, have the
wiring connections and circuits checked.
Electric Door Switch
: Open and close the electric door with the inner switch as well as the
exterior key switch. If the door is not moving correctly or the switch does not activate the door,
check the Emergency Door release to make sure it is secured properly. If it is still not working,
contact your local dealer.
Door Ajar Light/Buzzer:
Open the individual doors, lift door and or rear doors to make sure the
light is activated as it should be. If the light is not working immediately, contact your dealer for
a replacement switch or a wiring repair.
Heat and/or A/C Controls:
Turn on and check each level of the switches to see that they
function properly when activated.
Summary of Contents for Starcraft Bus
Page 30: ...29 NOTES ...
