Electric Audio/Video Systems
There are different sizes and styles of TV monitors, video players and/or radios that are
connected to the speaker system and can be controlled at the units or by a voyager system, if
installed. The electronics may be located overhead or beside the driver seat.
Owner’s manuals for each individual component can be found in the information packet supplied
with your vehicle. Review the individual manual for proper operations and maintenance.
Voyager System
The voyager system is not only a PA system but also allows many different functions of the
radio, TV or VCP to be controlled from the driver’s area. The following are basic operations
instructions for the different features that may be in your unit. For further information refer to
the Voyager manual located in your owner’s manual packet.
Bass Knob
: Turn clockwise to increase and counterclockwise to decrease the bass.
Treble Knob
: Turn clockwise to increase and counterclockwise to decrease the treble.
On/Vol Knob
: Turns the Voyager on and off and to control the volume.
Radio Button
: The radio must be turned on to operate. Press the button then you can adjust the
desired volume level at both the radio and at the voyager. Once the initial adjustment is made,
you will then be able to control, bass and treble on the voyager.
NOTE
: The channels can only
be changed on the radio unit.
VCP
Button
: Turn on the VCP to operate (indicator will be lit when activated) then the TV, next
select the VCP function on the voyager. Press the VCP button and the VCP power button to turn
on. You will then be able to control the VCP from the voyager by pressing the desired functions
such as play, rewind, etc.
PA Button
: To operate, plug the microphone into the input jack on front panel. Turn the PA to
the “ON” position. Depress the switch on the side of the microphone and hold in while
speaking. Indicator will be lit when activated. NOTE: When the PA system is activated (by
pressing the talk button), the TV, VCP or radio will be interrupted and the speakers are
automatically connected to the microphone amplifier allowing your voice to come through.
TV
: To operate, turn on the TV either at the unit or with the remote. After the TV is on, the
volume, bass and treble can be adjusted on the voyager system. The VCP button must be on to
activate the monitor. Channels must be changed on the TV unit or by using the remote. NOTE:
if the TV has been turned off at the voyager or at the remote, you will have to turn the TV back
on to reactivate the voyager functions.
NOTE:
To use radio, the other features such as TV or VCP must be turned off and visa versa, to
use the VCP the TV must be turned on at the unit.
Paging Mode
: If your unit is equipped with an external pager, this button allows you to switch
back and forth from the internal speaker to the internal/external speakers.
24
CAUTION
:
To reduce the risk of electrical shock, do not remove cover (or back).
There are no user serviceable parts inside. Refer servicing to qualified service personnel.
Summary of Contents for Starcraft Bus
Page 30: ...29 NOTES ...
