manualshive.com logo in svg

Ford Taurus 2006, Owner'S Manual

The Ford Taurus 2006 Quick Start Manual is a comprehensive guide to help users quickly and efficiently get acquainted with their vehicle. This user-friendly manual is available for free download at manualshive.com, providing easy access to all the necessary information and instructions needed for a seamless driving experience.

Share
Download
background image

How to disengage the automatic locking mode

Ford Motor Company recommends that all safety belt assemblies
and attaching hardware should be inspected by a qualified

technician after any collision. Safety belt assemblies not in use during a
collision should also be inspected and replaced if either damage or
improper operation is noted.

Disconnect the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.

After any vehicle collision, the seat belt system at all outboard
seating positions (except driver, which has no “automatic locking

retractor” feature) must be checked by a qualified technician to verify
that the “automatic locking retractor” feature for child seats is still
functioning properly. In addition, all seat belts should be checked for
proper function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if
the seat belt assembly “automatic locking retractor” feature or

any other seat belt function is not operating properly when checked
according to the procedures in Workshop Manual.

Failure to replace the Belt and Retractor assembly could
increase the risk of injury in collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and
front outboard passenger seating positions.

The safety belt pretensioners are designed to activate when the safety
belt is fastened during certain frontal or near-frontal collisions, or in
certain side collisions that result in side airbag activation (if the vehicle
is equipped with side airbags). A safety belt pretensioner is a device
which tightens the webbing of the lap and shoulder belts in such a way
that they fit more snugly against the body.

When the front airbags are activated, the safety belt pretensioners for
the driver and right front passenger seating positions will be activated
when the respective safety belt is properly buckled. If a side airbag is

2006 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

87

Summary of Contents for Taurus 2006









































































































































































































































Reviews:

No comments

Related manuals for Taurus 2006

Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Connects2 PARK-401 User Manual preview
PARK-401
Brand: Connects2 Pages: 2
ULTIMATE SPEED 1188 1525 Instructions For Use And Safety Manuallines preview
1188 1525
Brand: ULTIMATE SPEED Pages: 26
Subaru 1999 Legacy Owner'S Manual preview
1999 Legacy
Brand: Subaru Pages: 399

Brands by name

Popular brands

Load more brands