•
Review and follow the information
presented in the
Airbag
Supplemental Restraint System
section in this chapter.
•
Use the correct safety belt buckle
for that seating position.
•
Insert the belt tongue into the
proper buckle until you hear a
snap and feel it latch. Make sure
the tongue is securely fastened in
the buckle.
•
Keep the buckle release button pointing up and away from the safety
seat, with the tongue between the child seat and the release button,
to prevent accidental unbuckling.
•
Place seat back in upright position.
•
Put the safety belt in the automatic locking mode. Refer to
Automatic
locking mode.
•
LATCH lower anchors are recommended for use by children up to 48
pounds (22 kg) in a child restraint. Top tether anchors can be used
for children up to 60 pounds (27 kg) in a child restraint, and to
provide upper torso restraint for children up to 80 pounds (36 kg)
using an upper torso harness and a belt-positioning booster.
Ford Motor Company recommends the use of a child safety seat having a
top tether strap. Install the child safety seat in a seating position with
LATCH and tether anchors. For more information on top tether straps
and anchors, refer to
Attaching safety seats with tether straps
in this
chapter. For more information of LATCH anchors refer to
Attaching
safety seats with LATCH (Lower Anchors and Tethers for Children)
attachments
in this chapter.
Carefully follow all of the manufacturer’s instructions included
with the safety seat you put in your vehicle. If you do not install
and use the safety seat properly, the child may be injured in a sudden
stop or collision.
Rear-facing child seats or infant carriers should never be placed
in the front seats.
2006 Taurus
(tau)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
108
