manualshive.com logo in svg

Ford Taurus 2006, Owner'S Manual

The Ford Taurus 2006 Quick Start Manual is a comprehensive guide to help users quickly and efficiently get acquainted with their vehicle. This user-friendly manual is available for free download at manualshive.com, providing easy access to all the necessary information and instructions needed for a seamless driving experience.

Share
Download
background image

4. Open the tether anchor cover.

5. Clip the tether strap to the
anchor as shown.

If the tether strap is clipped incorrectly, the child safety seat
may not be retained properly in the event of a collision.

6. Install the child safety seat tightly using the LATCH anchors or safety
belts. Follow the instructions in this chapter.

7. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child
being injured in a collision greatly increases.

Attaching safety seats with LATCH (Lower Anchors and Tethers for
Children) attachments for child seat anchors

Some child safety seats have two rigid or webbing mounted attachments
that connect to two anchors at certain seating positions in your vehicle.
This type of child seat eliminates the need to use seat belts to attach the
child seat. For forward-facing child seats, the tether strap must also be
attached to the proper tether anchor. See

Attaching safety seats with

tether straps

in this chapter.

2006 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

113

Summary of Contents for Taurus 2006









































































































































































































































Reviews:

No comments

Related manuals for Taurus 2006

Suzuki SX4 SEDAN 2008 Owner'S Manual preview
SX4 SEDAN 2008
Brand: Suzuki Pages: 16
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
Rati Armster 2 User Manual preview
Armster 2
Brand: Rati Pages: 2
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
TATA Motors Indigo eCS Owner'S Manual & Service Book preview
Indigo eCS
Brand: TATA Motors Pages: 166
Advanced Diagnostics MVP PRO Manual preview
MVP PRO
Brand: Advanced Diagnostics Pages: 10
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4

Brands by name

Popular brands

Load more brands