manualshive.com logo in svg

Ford Taurus 2006, Owner'S Manual

The Ford Taurus 2006 Quick Start Manual is a comprehensive guide to help users quickly and efficiently get acquainted with their vehicle. This user-friendly manual is available for free download at manualshive.com, providing easy access to all the necessary information and instructions needed for a seamless driving experience.

Share
Download
background image

Passenger
Load - #/lb. (kg)

Luggage
Load - lb. (kg)

Max
Trailer Wt.- lb. (kg)

5 /750 (340)

0

800 (365)

4/600 (270)

150 (70)

800 (365)

2/300 (135)

150 (70)

1100 (500)

2/300 (135)

0

1250 (565)

The above chart is based on the specified vehicle at a maximum GCW
(Vehicle  Trailer weight) equal to 4,950 lb. (2,245 kg).

Do not exceed the GVWR or the GAWR specified on the
certification label.

Towing trailers beyond the maximum recommended gross trailer
weight exceeds the limit of the vehicle and could result in

engine damage, transaxle damage, structural damage, loss of control,
and personal injury.

Preparing to tow

Use the proper equipment for towing a trailer and make sure it is
properly attached to your vehicle. See your dealer or a reliable trailer
dealer if you require assistance.

Hitches

Do not use hitches that clamp onto the vehicle bumper. Use a load
carrying hitch. You must distribute the load in your trailer so that
10–15% of the total weight of the trailer is on the tongue.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers
of the vehicle hitch. To connect the trailer’s safety chains, cross the
chains under the trailer tongue and allow slack for turning corners.
If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are safe
if installed properly and adjusted to the manufacturer’s specifications. The
trailer brakes must meet local and Federal regulations.

2006 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA

(fus)

Tires, Wheels and Loading

137

Summary of Contents for Taurus 2006









































































































































































































































Reviews:

No comments

Related manuals for Taurus 2006

RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
TATA Motors nano genX Owner'S Manual preview
nano genX
Brand: TATA Motors Pages: 156
Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
BENDIX A-18 TRAILER ABS Manual preview
A-18 TRAILER ABS
Brand: BENDIX Pages: 40
Toyota RAV4 HV 2016 Quick Reference Manual preview
RAV4 HV 2016
Brand: Toyota Pages: 56
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Porsche 1972 911 Workshop Manual preview
1972 911
Brand: Porsche Pages: 1005
Stack ROLL POD Installation Manual preview
ROLL POD
Brand: Stack Pages: 4
TEINHOF P-038 Fitting And Operation Manual preview
P-038
Brand: TEINHOF Pages: 2

Brands by name

Popular brands

Load more brands