manualshive.com logo in svg

Ford Taurus 2006, Owner'S Manual

The Ford Taurus 2006 Quick Start Manual is a comprehensive guide to help users quickly and efficiently get acquainted with their vehicle. This user-friendly manual is available for free download at manualshive.com, providing easy access to all the necessary information and instructions needed for a seamless driving experience.

Share
Download
background image

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
Important safety precautions

Do not overfill the fuel tank. The pressure in an overfilled tank
may cause leakage and lead to fuel spray and fire.

The fuel system may be under pressure. If the fuel filler cap is
venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may
spray out and injure you or others.

If you do not use the proper fuel filler cap, excessive pressure or
vacuum in the fuel tank may damage the fuel system or cause

the fuel cap to disengage in a collision, which may result in possible
personal injury.

Automotive fuels can cause serious injury or death if misused or
mishandled.

Fuel ethanol and gasoline may contain benzene, which is a
cancer-causing agent.

Observe the following guidelines when handling automotive fuel:

•

Extinguish all smoking materials
and any open flames before
refueling your vehicle.

•

Always turn off the vehicle before
refueling.

•

Automotive fuels can be harmful
or fatal if swallowed. Fuels such as gasoline and ethanol are highly
toxic and if swallowed can cause death or permanent injury. If fuel is
swallowed, call a physician immediately, even if no symptoms are
immediately apparent. The toxic effects of fuel may not be visible for
hours.

•

Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind
can lead to eye and respiratory tract irritation. In severe cases,
excessive or prolonged breathing of fuel vapor can cause serious
illness and permanent injury.

2006 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

203

Summary of Contents for Taurus 2006









































































































































































































































Reviews:

No comments

Related manuals for Taurus 2006

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Code 3 WingMan Installation & Operation Manual preview
WingMan
Brand: Code 3 Pages: 8
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
Mitsubishi MOTORS OUTLANDER PHEV 2022 Manual preview
OUTLANDER PHEV 2022
Brand: Mitsubishi MOTORS Pages: 8
Prime Design VRI3-FT31B Assembly Manual preview
VRI3-FT31B
Brand: Prime Design Pages: 16
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4
Ford FLEX 2019 Quick Reference Manual preview
FLEX 2019
Brand: Ford Pages: 10
Fiat Panda 2015 Owner'S Handbook Manual preview
Panda 2015
Brand: Fiat Pages: 204
Ratio Electric HOME BOX SMART Manual preview
HOME BOX SMART
Brand: Ratio Electric Pages: 16
WALMEC 40087 Mounting Instructions preview
40087
Brand: WALMEC Pages: 6
Cequent Performance Products 76025 Installation Instructions Manual preview
76025
Brand: Cequent Performance Products Pages: 18
Kia Carnival MPV 2023 Manual preview
Carnival MPV 2023
Brand: Kia Pages: 4

Brands by name

Popular brands

Load more brands