manualshive.com logo in svg

Ford Taurus 2006, Owner'S Manual

The Ford Taurus 2006 Quick Start Manual is a comprehensive guide to help users quickly and efficiently get acquainted with their vehicle. This user-friendly manual is available for free download at manualshive.com, providing easy access to all the necessary information and instructions needed for a seamless driving experience.

Share
Download
background image

POWER SIDE VIEW MIRRORS

To adjust your mirrors:

1. Select

L

to adjust the left mirror

or

R

to adjust the right mirror.

2. Move the control in the direction
you wish to tilt the mirror.

3. Return to the center position to
disable the adjust function.

Heated outside mirrors

(if equipped)

Both mirrors are heated
automatically to remove ice, mist
and fog when the rear window
defrost is activated.

Do not remove ice from the
mirrors with a scraper or
attempt to readjust the mirror
glass if it is frozen in place.
These actions could cause
damage to the glass and mirrors.

SPEED CONTROL

With speed control set, you can maintain a speed of 30 mph (48 km/h)
or more without keeping your foot on the accelerator pedal. Speed
control does not work at speeds below 30 mph (48 km/h).

Do not use the speed control in heavy traffic or on roads that
are winding, slippery or unpaved.

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

2006 Taurus

(tau)

Owners Guide (post-2002-fmt)
USA

(fus)

Driver Controls

45

Summary of Contents for Taurus 2006









































































































































































































































Reviews:

No comments

Related manuals for Taurus 2006

Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
Westin 31-0190 Installation Instructions preview
31-0190
Brand: Westin Pages: 2
Oldsmobile Bravada 1997 Owner'S Manual preview
Bravada 1997
Brand: Oldsmobile Pages: 358
FALCON RIDGE CF-UFORCE-DRW01 Instructions For Installation And Care preview
CF-UFORCE-DRW01
Brand: FALCON RIDGE Pages: 6
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228
Air Lift AirCELL 52205 Installation Manual preview
AirCELL 52205
Brand: Air Lift Pages: 12
Ranger design 5047 Installation Manual preview
5047
Brand: Ranger design Pages: 6
ECS Electronics TO-245-BHU Fitting Instructions Manual preview
TO-245-BHU
Brand: ECS Electronics Pages: 14
Scion 2015 FR-S Quick Reference Manual preview
2015 FR-S
Brand: Scion Pages: 24

Brands by name

Popular brands

Load more brands