manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 70 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 70

Automatic High Beam Lamp

It will illuminate when this
feature is on See 

Autolamps

(page 53).

Auto-Start-Stop Lamp

It will illuminate to inform you
when the engine shuts down or
in conjunction with a message.

Battery Warning Lamp

If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical

equipment. Have your vehicle checked by
an authorized dealer immediately.

Brake System Warning Lamp

It illuminates when you engage
the parking brake and the
ignition is on.

If it illuminates when your vehicle is
moving, make sure the parking brake is
disengaged.

If the parking brake is disengaged, this
indicates low brake fluid level or a brake
system fault.

Have your vehicle checked immediately.

WARNING

Driving your vehicle with the warning
lamp on is dangerous. A significant
decrease in braking performance

may occur. It will take you longer to stop
your vehicle. Have your vehicle checked by
an authorized dealer immediately. Driving
extended distances with the parking brake
engaged can cause brake failure and the
risk of personal injury.

Cruise Control Indicator

E71340

It will illuminate when you switch
this feature on.  See 

Using

Cruise Control

 (page 158).

Direction Indicator

Illuminates when the left or right
direction indicator or the hazard
warning flasher is turned on. If

the indicators stay on or flash faster, check
for a burnt out bulb. See 

Changing a Bulb

(page 264).

Door Ajar Indicator

It will illuminate when the
ignition is on and any door is not
completely closed.

Engine Coolant Temperature
Warning Lamp

It will illuminate when the engine
or motor coolant temperature is
high. Stop your vehicle as soon

as possible and contact your authorized
dealer.

Engine Oil Warning Lamp

WARNING

If it illuminates when you are driving
do not continue your journey, even if
the oil level is correct. Have your

vehicle checked.

If it illuminates with the engine
running or when you are driving,
this indicates a malfunction.

Stop your vehicle as soon as it is safe to
do so and switch the engine off. Check the
engine oil level.

67

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Instrument Cluster

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments